Material Safety Data Sheet for IMG-6357A |
|
| Product Name | Peptide-affinity Purified Polyclonal Antibody to NALP7 |
| Content | 100 ug in 200 ul PBS containing 0.05% BSA and 0.05% sodium azide. Sodium azide is highly toxic. |
| Supplier Identification | IMGENEX
Corporation 11175 Flintkote Avenue, Suite E, San Diego, CA 92121 (USA) Tel: (858) 642-0978 Toll free: 1-888-723-GENE (4363) (in USA only) Fax: (858) 642-0937 Email info@imgenex.com |
Material Safety Data Sheet for Sodium Azide |
|
| Hazard Information | |
| Chemical Name | Sodium Azide |
| Chemical Formual | NaN3 |
| CAS Number | 26628-22-8 |
| EEC-No | 247-852-1 |
| Hazard Identification | |
| Very toxic if swallowed. Contact with acids liberates very toxic gas. | |
| First Aid Measures | |
| Eye Contact | Irrigate thoroughly with water for at least 15 minutes. Seek medical advice. |
| Skin Contact | Wash skin thoroughly with soap and water for at least 15 minutes. Remove contaminated clothing and wash before re-use. In severe cases, obtain medical attention. |
| Inhalation | Remove from exposure, rest and keep warm. In severe cases, seek medical advice. |
| Ingestion | Wash out mouth throughly with water and give plenty of water to drink. Seek medical advice. |
| Accidental Release Measures | |
| Wear appropriate protective clothing. Inform others to keep a safe distance. Spread soda ash liberally over spillage. If local regulations permit, mop up cautiously with plenty of water and run to waste, diluting greatly with running water. Otherwise transfer to container and arrange removal by disposal company. Wash site of spillage throughly with water. | |
| Handling and Storage | |
| Handling | Avoid prolonged contact with copper or lead, especially in drainage systems or mercury and other heavy metals which may result in the formation of explosive azides. Under no circumstances eat, drink or smoke while handling this material. Wash hands throughly after working with this material. Contaminated clothing should be removed and washed before re-use. |
| Storage | Store at 4°C, stable for 6 months. For long-term storage, aliquot and store at -20°C. |
| Exposure Controls / Personal Protection | |
| Respirator | Dust respirator |
| Ventilation | Extraction hood |
| Gloves | Rubber or plastic |
| Eye Protection | Lab goggles or face shield |
| Other Precautions | Plastic apron, sleeves, boots - if handling large quantities. |
| Physical and Chemical Properties | |
| Form | Liquid |
| Color | Colorless |
| Odor | Odorless |
| Melting Point | No data available |
| Boiling Temperature | No data available |
| Density | No data available |
| Vapor Pressure | No data available |
| Solubility in Water | Very soluble |
| Flash Point | No data available |
| Explosion limits | No data available |
| Ignition Temperature | No data available |
| Stability and Reactivity | |
| Stable unless heated. Slow reaction at ambient temprature unless water contains dissolved carbon dioxide. Decomposes violently with chromyl chloride.Contact with acids liberates highly toxic gas: forms readily detonatable salts with many materials, particularly heavy metals. |
|
| Toxicological Information | |
| After ingestion, irritation of mucous membranes in the mouth, pharynx, oesophagus and gastno-intenstial tract. Danger of skin absorption. |
|
| Disposal Considerations | |
| Chemical residues are generally classified as special waste, and as such covered by regulations which vary according to location. Contact your local waste disposal authority for advice, or pass to chemical disposal company. Rinse out empty containers throughly before disposal. | |
| Other Information | |
| The information contained in this material safety datasheet is belived to be accurate but it is the responsibility of the user to determine the applicability of these data to the formulation of necessary safety precautions. IMGENEX shall not be held responsible for any damage resulting from the use of the above product or the information contained in this material safety data sheet. | |
| © Copyright Imgenex Corporation | |